基于回波平移序列的快速三维磁共振温度成像方法

高强度聚焦超声（HIFU）是一种无创的热消融疗法，为保证其安全性和有效性，需要一种精度高、速度快的测温方法在其治疗过程中对温度进行监控.基于质子共振频率位移（PRFS）的磁共振温度成像（MRT）对温度具有较高的灵敏度，且与温度具有良好的线性关系，因此常被用于引导HIFU治疗.然而在实际应用中，HIFU治疗的最大隐患在于可能造成表皮灼伤，并且灼伤区域可能与焦点区域相隔较远.因此MRT的监控范围十分重要.本文基于三维回波平移成像序列，结合可控混叠的空间并行成像技术，实现了时间分辨率为3 s的快速三维温度成像.为了验证该方法的精度，本文首先设计了仿体降温实验，利用光纤温度计验证回波平移序列测温的准确度和精确度.然后在室温条件下扫描离体猪肉组织，对比加速前后的MRT的测温精确度.在HIFU加热条件下扫描离体猪肉组织，对比加速前后的MRT的测温准确度.结果显示，本文提出的方法可以在3 s内完成三维温度精准测量，对于HIFU治疗的安全监控具有重要意义.     

A new class of conformable spectral observers for signal reconstruction

In this work, the design of spectral observers for signal reconstruction based on Kalman filters is performed and evaluated. The conformable derivative and the beta‐derivative were used to design the Kalman filters. Both derivatives satisfy the same formulas of the classical derivation, eg, the chain rule. The derivative order, the Ricatti equation parameters, and the observers tuning parameters were optimized using an optimization algorithm based on the bat's echolocation behavior (Bat algorithm). The simulation results showed the advantages of using the proposed observers for the signal reconstruction.     

Synergistic Effects of Pseudocolor Imaging,Differentiation, and Square and Logarithmic Conversion on Accuracy of Quantification of Chemical Characteristics Using Test Strips and Similar Products

Test strips and similar products are highly feasible tools for the rapid and approximate determination of chemical characteristics. Although the application of both the quantitative observation of coloration and regression modeling has recently enabled these products to become quantitative tools, their precision and accuracy may be further improved. In this study, the pseudocolor imaging of the coloration image, derivative spectrophotometry-like differentiation of the coloration values, and logarithmic conversion of the raw and derivative values were compared in terms of the precision and accuracy of the quantitative determination of corrosiveness, glucose, nitrate, and pH using the products. The best regression models for the determination were provided by the combination of pseudocolor imaging and differentiation (nitrate and pH); pseudocolor imaging, differentiation, and square-conversion (corrosiveness); or all of the techniques (glucose). When compared to the use of the original 10 raw coloration variables of red-green-blue, cyan-magenta-yellow-key black, and L*a*b* color models only, the above combinations improved the normalized mean absolute error from 14.8% to 3.09% (corrosiveness), 6.33% to 3.15% (glucose), 7.46% to 4.56% (nitrate), and 3.22% to 0.94% (pH). These achievements were largely attributed to the combination of multiple variables that have non-linear and nonmonotonic relationships with the chemical characteristics.     

Nanomaterials in Cerebrovascular Disease Diagnose and Treatment

Cerebrovascular diseases (CVDs) are among the most serious diseases with high mortality and disability rates. The prevalent diagnosis and treatment methods of CVDs include imaging and interventional therapy. With the development of nanotechnology, large numbers of nanomaterials have been applied to the diagnosis and treatment of CVDs, mainly including carbon nanotubes, quantum dots, fullerenes, and dendrimers. In this review, the applications of nanomaterials in the field of diagnosis and treatment of CVDs, mainly including drug target delivery, imaging, therapy, endovascular treatment, and angiogenesis, are summarized. The applications of nanomaterials in the field of CVD are almost in the laboratory, and more effort is needed for clinical translation. The aim of this review is to provide useful information for future research and equipment development.     

Facile Synthesis of Manganese Tellurite Nanoparticles for Magnetic Resonance Imaging-Guided Photothermal Therapy

In this study, manganese tellurite (MnTeO₃) nanoparticles are developed as theranostic agents for magnetic resonance imaging (MRI)-guided photothermal therapy of tumor. MnTeO₃ nanoparticles are synthesized via a simple one-step method. The as-synthesized MnTeO₃ nanoparticles with uniform size show good biocompatibility. In particular, MnTeO₃ nanoparticles exhibit a high photothermal conversion efficiency (η = 26.3%), which is higher than that of gold nanorods. Moreover, MnTeO₃ nanoparticles also have high MRI performance. The longitudinal relaxivity (r₁) value of MnTeO₃ nanoparticles is determined to be 8.08 ± 0.2 mm ⁻¹ s⁻¹, which is higher than that of clinically approved T₁-contrast agents Gd-DTPA (4.49 ± 0.1 mm ⁻¹ s⁻¹). The subsequent MnTeO₃ nanoparticles-mediated photothermal therapy displays a highly efficient ablation of tumor cells both in vitro and in vivo with negligible toxicity. It is demonstrated that MnTeO₃ nanoparticles can serve as promising theranostic agents with great potentials for MRI-guided photothermal therapy.     

基于级联卷积神经网络的前列腺磁共振图像分类

针对深度学习训练成本高，以及基于磁共振图像的前列腺癌临床诊断需要大量医学常识且极为耗时的问题，本文提出了一种基于级联卷积神经网络（Convolutional Neural Network，CNN）和磁共振图像的前列腺癌（Prostate Cancer，PCa）自动分类诊断方法，该网络以Faster-RCNN作为前网络，对前列腺区域进行提取分割，用于排除前列腺附近组织器官的干扰；以基于ResNet改进的网络结构CNN40_bottleneck作为后网络，用于对前列腺区域病变进行分类.后网络由瓶颈结构串联组成，其中使用批量标准化（Batch Normalization，BN）、全局平均池化（Global Average Pooling，GAP）进行优化.实验结果证明，本文方法对前列腺癌诊断结果较好，而且缩减了训练时间和参数量，有效降低了训练成本.     

高分辨率微型星载相机光学系统的设计及应用

为了克服太空环境的复杂性，满足航天工程的空间使用要求，研制一款2 500万像素宽光谱共焦成像的微型星载相机光学系统。该系统适应卫星发射和在轨道运行的恶劣环境，具有抗冲击震动、耐太空高温差强辐射，体积小，质量轻等优点。设计的系统可在450 nm～800 nm的谱段内清晰成像，焦距181 mm，入瞳口径45 mm，视场角10.4°，边缘相对照度0.81，轴上点MTF:0.57@55 lp/mm，0.33@110 lp/mm，畸变1.2%，镜头质量622 g，外形尺寸Φ58.3 mm×117 mm，抗辐照性能≥5 krad。通过温度适应性的模拟和优化，用户进行?30 ℃～+70 ℃光学镜头热真空试验，可正常工作。该系统已成功应用于天宫二号伴飞卫星相机中，获得的图像清晰稳定，为空间遥感实验观测发挥了重要的作用。     

OCS分子在128 nm附近的光解动力学研究：S(3PJ=2,1,0)、S(1D2)以及S(1S0)产物通道

本文利用时间切片离子成像技术对OCS分子进行了真空紫外波段的光解动力学研究. 在四个光解光波长(从129.32到126.08 nm)下测量了硫原子解离产物S(³P_J=2,1,0)、S(¹D₂)、S(¹S₀)的速度影像，并从中清晰地发现了四个主要的解离产物通道：S(³P_J=2,1,0)+CO(X¹Σ⁺)，S(³P_J=2,1,0)+CO(A³π)，S(¹D₂)+CO(X¹Σ⁺)和S(¹S₀)+CO(X¹Σ⁺). 在实验影像中，产物CO分子的部分振动态结构能够得到分辨. 实验还获取解离产物总平动能谱，产物分支比和角分布. 对实验结果进行分析显示除绝热解离通道S(³P_J=2,1,0)+CO(A³π)之外，在其他三个产物通道中非绝热效应都起到非常重要的作用.     

A Direct NMR Method To Measure Self-Diffusion Coefficients in Liquids by Monitoring Diffusing Molecules through One-Dimensional Imaging

Diffusion processes can be followed directly by recording one-dimensional images of a selected slice at variable intervals after selective inversion of the magnetization. The resulting diffusion coefficients of H₂O and DMSO are consistent with earlier studies at different temperatures, obtained by monitoring the attenuation of NMR signals as a function of the gradient amplitude in gradient echo sequences.     

Nido-carborane encapsulated by BODIPY zwitterionic polymers: Synthesis,photophysical properties and cell imaging

Carborane encapsulation was visualized by using fluoroboropyrrole (BODIPY) zwitterionic polymer as fluorescence marker. Firstly, a water-soluble fluorescent probe carrier was prepared by combining the BODIPY derivatives with poly (carboxybetaine methacrylate) (p-CBMA). Two oil-in-water carborane polymers were self-assembled in organic solvents by means of dual ion hydrogen bonding. The ultraviolet and fluorescence spectra were measured with different organic solvents, and the spectra ranged from 531 to 555 nm. The dynamic self-assembly effect was tested by TEM, and the internal microscopic phenomena of the water-soluble polymer were further observed. It was confirmed that two kinds of BODIPY zwitterionic polymers were firmly encase the fat-soluble carborane, forming an oval shape. Carboranes are water-soluble, can achieve biocompatible expression, and can visualize the degree of aggregation in the targeted cells through its own fluorescence effect. Subsequent imaging of the cells showed that both polymers entered the targeted cells.